Tom Boyd Tom Boyd's Profielpagina

Tom Boyd Tom Boyd

0 Cursus ingeschreven • 0 Cursus afgerond

Biografie

JN0-481 Cert Exam & JN0-481 Reliable Braindumps Ppt

Work hard and practice with our Juniper JN0-481 dumps till you are confident to pass the Juniper JN0-481 exam. And that too with flying colors and achieving the Juniper JN0-481 Certification on the first attempt. You will identify both your strengths and shortcomings when you utilize Data Center, Specialist (JNCIS-DC) practice exam software.

If you hope to get a job with opportunity of promotion, it will be the best choice chance for you to choose the JN0-481 study question from our company. Because our JN0-481 study materials have the enough ability to help you improve yourself and make you more excellent than other people. The JN0-481 Learning Materials from our company have helped a lot of people get the certification and achieve their dreams. And you also have the opportunity to contact with the JN0-481 test guide from our company.

>> JN0-481 Cert Exam <<

JN0-481 Reliable Braindumps Ppt, JN0-481 New Dumps Files

Our JN0-481 practice exam is specially designed for those people who have not any time to attend the class and prepare Juniper exam tests with less energy. You will understand each point of questions and answers with the help of our JN0-481 Exam Review. And our exam pass guide will cover the points and difficulties of the JN0-481 real exam, getting certification are just a piece of cake.

Juniper Data Center, Specialist (JNCIS-DC) Sample Questions (Q52-Q57):

NEW QUESTION # 52
You must configure a static route for traffic to exit a configured routing zone. In the Juniper Apstra Ul, where would you accomplish this task?

A. under Staged -> Connectivity Templates
B. under Staged -> Virtual -> Routing Zones
C. under Active -> Connectivity Templates
D. under Active -> Virtual -> Routing Zones

Answer: A

Explanation:
To configure a static route for traffic to exit a configured routing zone, you need to use the Connectivity Templates feature in the Juniper Apstra UI. A Connectivity Template is a set of configuration parameters that can be applied to a device or a group of devices in a blueprint. You can use Connectivity Templates to configure static routes, BGP, OSPF, and other network services. To create a Connectivity Template, you need to go to the Staged tab and select Connectivity Templates from the left menu. Then, you can click on the + icon to create a new template. You can specify the name, description, and scope of the template. The scope determines which devices or device groups the template will be applied to. You can also specify the order of the template, which determines the priority of the template when multiple templates are applied to the same device. After creating the template, you can add configuration items to the template. To add a static route, you need to select Static Route from the drop-down menu and enter the destination network, subnet mask, and next- hop IP address. You can also specify the administrative distance and the track object for the static route. After adding the configuration items, you need to save the template and commit the changes to the blueprint.

NEW QUESTION # 53
You are using Juniper Apstra to design a data center fabric. In this scenario, which object type associates a specific vendor model to a logical device?

A. device profiles
B. templates
C. agent profiles
D. interface map

Answer: A

Explanation:
Device profiles are objects that associate a specific vendor model to a logical device in Juniper Apstra. Device profiles contain extensive hardware model details, such as form factor, ASIC, CPU, RAM, ECMP limit, and supported features. Device profiles also define how configuration is generated, how telemetry commands are rendered, and how configuration is deployed on a device. Device profiles enable the Apstra system to render and deploy the configuration according to the Apstra Reference Design.

NEW QUESTION # 54
Which two statements ate correct about the graph query output shown in the exhibit? (Choose two.)

A. The interface has an IP address assigned to it.
B. The switch in the output is a Juniper device.
C. The output shows a LAG connection.
D. The interface has tags assigned to it.

Answer: B,C

Explanation:
The graph query output shown in the exhibit is a JSON representation of an interface node and its properties in the Apstra graph database. Based on the output, we can infer the following statements:
The output shows a LAG connection. This is true because the interface node has a property called lag_mode which is set to lacp_active, indicating that the interface is part of a link aggregation group (LAG) that uses the Link Aggregation Control Protocol (LACP) to negotiate the link state and parameters.
The switch in the output is a Juniper device. This is true because the interface node has a property called if_name which is set to ae, indicating that the interface name follows the Juniper naming convention for aggregated Ethernet interfaces.
The interface has an IP address assigned to it. This is false because the interface node has properties called ipv4_addr and ipv6_addr which are both set to null, indicating that the interface does not have any IPv4 or IPv6 address configured.
The interface has tags assigned to it. This is false because the interface node has a property called tags which is set to null, indicating that the interface does not have any tags associated with it.

NEW QUESTION # 55
The 10.100.0.0/16 route is being advertised into your BGP IP fabric. ECMP load balancing has been properly enabled on all devices.
In this scenario, how many routes will the leaf device in AS 65000 receive for the 10.100.0.0/16 prefix?

A. 0
B. 1
C. 2
D. 3

Answer: B

Explanation:
The leaf device in AS 65000 will receive three routes for the 10.100.0.0/16 prefix, one from each spine device in AS 65001, AS 65002, and AS 65003. Since ECMP load balancing is enabled, the leaf device will install all three routes in its routing table and distribute the traffic among them.

NEW QUESTION # 56
You are adding a new switch to Juniper Apstra software. The Managed Devices page shows the
"0 OS- Quarantined" status. What is the proper next step to make the device ready for use in a blueprint?

A. Acknowledge the device.
B. Install the agent for the device.
C. Take the device out of drain state.
D. Take the device out of maintenance mode.

Answer: A

Explanation:
When a new switch is added to Juniper Apstra software, it initially shows the "0 OS-Quarantined" status, which means that the device is not yet managed by Apstra and has not been assigned to any blueprint. The proper next step to make the device ready for use in a blueprint is to acknowledge the device, which is a manual action that confirms the device identity and ownership. Acknowledging the device changes its status to "OOS-Ready", which means that the device is ready to be assigned to a blueprint and deployed.

NEW QUESTION # 57
......

The beauty of life may be that we don't know what will happen in the future, but even so, we are willing to pursue a bright future. Happiness for us may be the life we want to live, and our JN0-481 Study Materials can provide a good foundation for you to achieve this goal. A good job requires good skills, and the most intuitive way to measure your ability is how many qualifications you have passed and how many qualifications you have.

JN0-481 Reliable Braindumps Ppt: https://www.dumpsfree.com/JN0-481-valid-exam.html

We deeply hold the belief that we the best JN0-481 Reliable Braindumps Ppt - Data Center, Specialist (JNCIS-DC) exam dump will help us win our competitors, Each material helps students pass JN0-481 with good grades in just one attempt, Juniper JN0-481 Cert Exam Of course, the education industry also takes place great changes, This kind of situation is rare, but we give you the promise as a protection for your benefits As we all know, the Juniper JN0-481 exam is one of the most recognized exams nowadays.

Personally I like all of the races, Build JN0-481 Reliable Braindumps Sheet and manage unique Minecraft configurations with their own versions, worlds, resource packs, and profiles, We deeply hold the JN0-481 belief that we the best Data Center, Specialist (JNCIS-DC) exam dump will help us win our competitors.

100% Pass 2025 High Hit-Rate Juniper JN0-481 Cert Exam

Each material helps students pass JN0-481 with good grades in just one attempt, Of course, the education industry also takes place great changes, This kind of situation is rare, but we give you the promise as a protection for your benefits As we all know, the Juniper JN0-481 exam is one of the most recognized exams nowadays.

No specific plugins are required to take this Data Center, Specialist (JNCIS-DC) practice test.